MTM Medium Speed Trapezium Mill
To be used many industrial areas, the MTM Medium Speed Trapezium Mill is designed and fabricated by our own company, which was injected many new and high technology, as trapezium’s working surface, flexible connection, roll linked pressure boost…… It is really different traditional mills with defects, the MTM Medium Speed Trapezium Mill has capacity, fineness, energy consumption, service life advantages, it is the substitute of the traditional mills. The machine can be used: such as building, mining, nonmetal, abrasive, bearing materials, chemical, chemical fertilizer, metallurgy, ceramic, steel, thermal power, bricks and tiles, coal industry …... It can grind these materials which are 9 or less on the Meshes scale and moisture is below 6%, and they should be non-explosive and non-flammable mining materials. The final size can be adjusted from 30 to 400 meshes. The mill can be used many materials grinding, our international customers often use it to grind cement (raw meal and cement clinker), quartz, feldspar, dolomite, graphite, fluorite, aedelforsite, phosphate ore, calcite, gypsum, limestone, fused calcium-magnesium phosphate, car amide, electrolytic manganese metal, coal, gangue, slag, zirconium, ferromanganese, steatite, granite, orthoclase, marble, barites, ceramics, glass……
MTM Medium Speed Trapezium Mill is a Chinese patented grinding mill, the structure suitable, size small, energy saving, working limited time longer; is this new machine features. In the grinding mill, air is driven into the undersurface of the grinding ring and flowed upward, carrying all its technical performance has reached leading and international level this is Shanghai Shibang machinery company, a China grinding mill manufacturers.
five technical advantages:
1、The ladder-shaped rollers and rings improve crushing efficiency greatly. The rollers and ring are designed in the main machine of an inverted trapezium, which control the material’s slip velocity between rollers and rings. They can extend the grinding time, and enhance the crushing effect.
2、The press springs with balancing and pressurized function and the forming resilient connection with steady and vibration reducing function are invented into our machines. The symmetrical roller assembly is connected by horizontally-placed spring rod. When the large materials impact one roller assembly, to keep balance, the radial force will pass to another roller assembly, which is on the plane of symmetry through spring rod. Under this condition, the whole device’s bearing is improved to be 40% on the other mills; and the forming resilient connection can reduce the vibration and noise, also it can avoid resonance.
3、The powder classifier adopts high density impeller, which can increase precision of powder and capacity. It has been proved that: under fixed spindle speed, to enhance the density of impeller is to enhance the fineness of final products. In other words, when the fineness of final product is fixed, the spindle speed of high density impeller is lower than the low density one. Thus under the same power, our machine can reduce resistance of air’s flow, the capacity can be improved more than 50% over the traditional one.
4、There is high-efficiency and energy-saving blower installed on our machine. The efficiency of prismatic blade equipped on the traditional machine is only 62%, but the efficiency of the energy saving blower, whose impeller and blade are both stamping, is 85%.
5、There is convenient impeller adjusting device. The clearance between housing and ending of powder classifier’s blade also effects fineness. Our mill is convenient to adjust the fineness.
Technical Data:
| Item | MTM100 | MTM130 | MTM160 |
| Number of roller | 4 | 5 | 6 |
| Maximum diameter of roller ×Height(mm) | Φ320×200 | Φ400×240 | Φ440×270 |
| Ring inner diameter × Height(mm) | Φ980×200 | Φ1280×240 | Φ1600×270 |
| Main engine spindle speed(r/min) | 130 | 98 | 82 |
| Maximum feeding grain size (mm) | <25 | <30 | <35 |
| Grain size of finished product (mm) | 1.6 －0.045 | 1.6 －0.045 | 1.6 －0.045 |
| Output (t/h) | 3 － 8.8 | 6 －13 | 13 －22 |
| Overall dimension (mm) | 9910×5365×8310 | 7910×7000×9645 | 12550×5700×8355 |
| Weight(t) | 16 | 26.1 | 35 |
| Name | Item | Unit | Specification and technical data | |||
| MTM100 | MTM130 | MTM160 | ||||
| Motor of main unit
|
Model | - | Y225M-4 | Y280S-4 | Y135M1-4 | |
| Power | kw | 45 | 90 | 132 | ||
| Spindle speed | r/min | 1480 | 1480 | 1480 | ||
| Speed-adjustable motor | Model | - | GZT2-42-4 | YCT200-4B | JZT2-52-4 | |
| Power | kw | 5.5 | 7.5 | 11 | ||
| Spindle speed | r/min | 125~1250 | 125~1250 | 125~1250 | ||
| Motor of elevator | Model | - | Y1000L-4 | Y1000L2-4 | Y112M-4 | |
| Power | kw | 3 | 3 | 4 | ||
| Spindle speed | r/min | 1420 | 1420 | 1420 | ||
| Motor of centrifugal induced draught fan | Model | - | Y225S-4 | Y250M-4 | Y112M-4 | |
| Power | kw | 37 | 75 | 132 | ||
| Spindle speed | r/min | 1480 | 1480 | 1480 | ||
| Motor of jaw crusher | Model | PE | 200x350 | 250X400 | 250x400 | 250x750 |
| - | - | Y160M-6 | Y180L-6 | Y180L-6 | Y200M-6 | |
| Power | kw | 7.5 | 15 | 15 | 22 | |
| Spindle speed | r/min | 970 | 970 | 970 | ||
| Electromagnetic vibrating feeder | Model | - | GZ1F | GZ2F | GZ3F | |
| Spindle speed | watt | 60 | 150 | 200 | ||