Impact Crusher
Working Principle:
Zenith impact crusher use the impact energy to break rock or other materials. When the impact crusher works, the motor drives the rotor where the plate hammers fixed rotate with high speed. The raw materials are crushed in the crushing cavity. And the high-speed rotating rotor casts the crushed materials along tangential direction to impact plate at the other end of the crushing cavity. The materials are crushed again, and then, they return to the plate hammer to undergo the process above repeatedly. The materials are bumping with each other when being sent between the plate hammer and the impact plate. The materials become cracked, loose and then comminuted by knocking by the plate hammer, impact with impact plate and bump between materials. The materials with grain size smaller than the gap between impact plate and plate hammer will be discharged.
Impact Crusher Operation and Maintenance:
1. Make a Rigorous testing before you start the impact crusher.
2. Check the lubrication system regularly ,when the impact crusher system is running.
3. Feed the materials evenly to avoid stones of too big size and materials that can’t be crushed.
4. Change the blow bar of the impact crusher timely ,so the crusher can keep the balance for long time running.
5. There is a strong impact on the materials when the crusher is running, and the engineers should keep the machine sealed so as to stop the dust flowing into the air.